Problems and Remedies for Screen Clogging in Pharmaceutical

Wet Screening
Causes: Remedies
  • Doughy or sticky wet mass:
  1. Avoid oscillating granulators.
  2. Use an extrusion-type granulator or Fitz Mill without screens.
  3. Reduce granulation time
  4. Add 5% to 20% Avicel PH-101 (gives less sticky or doughy mass, easier to screen)
  • Too much water in mass: Reduce water content; add water gradually and mix well after each addition.
  • Mass sensitive to water content: Incorporate 5% to 20% Avicel PH-101 (allows a wider range of solvent volume).
  • Gummy binder: Change the binder
  • Component or active ingredient: Use diluted or anhydrous ethyl or isopropyl alcohol (if latter, determine acceptable residual solvent level by GC or another appropriate method); change binder.

Post a Comment

Previous Post Next Post
close